Injection Molded Zirconia Ceramic Probe Housing for Sensor

Injection Molded Zirconia Ceramic Probe Housing for Sensor

Injection Molded Zirconia Ceramic Probe Housing for Sensor

White Zirconia Ceramic Dowel Pin

White Zirconia Ceramic Dowel Pin

White Zirconia Ceramic Dowel Pin 3X Ceramic Parts company produce

ceramic support beam

CNC Machining Ceramic Support Beam

The overall length of this ceramic support beam reach to 846mm , the step , hole , thread , slot are machined on the CNC machine .  It is used as a support beam on a solid polishing machine,  its material is 99% alumina ceramic , because the part need to be high temperature resistant and wearable .

Laboratory Use Small SiC Silicon Carbide Crucible

Laboratory Use Small SiC Silicon Carbide Crucible

Silicon carbide is used to make crucibles because of its stable chemical properties, wear-resistant and heat-resistant properties. Silicon carbide crucible is a kind of crucible with very good performance. Next, let's carefully explain the excellent properties of silicon carbide crucible.

114x114x0.34mm Si3N4 Silicon Nitride Substrate Plate

114x114x0.34mm Si3N4 Silicon Nitride Substrate Plate

100x100x0.32mm Si3N4 Silicon Nitride Substrate Plate The power conductive terminal of IGBT module for electric vehicles needs to carry hundreds of amperes of high current, which has high requirements for conductivity and thermal conductivity. In th

SiC Silicon Carbide Heat Exchange FurnaceTube Pipe

SiC Silicon Carbide Heat Exchange FurnaceTube Pipe

SiC heat exchange furnace tube  is used in diffusion furnaces in semiconductor and photovoltaic industries as atmosphere sintering furnace tubes.

Semiconductor Ceramic LED Silicon Carbide ICP Etching Disk

Semiconductor Ceramic LED Silicon Carbide ICP Etching Disk

Silicon carbide tray for LED etching (SiC tray) φ 600mm is a special accessory for deep silicon etching (ICP etching machine) Wafer carrier, also known as wafer carrier and silicon wafer carrier, is called pocket wafer in English. It is widely used in CVD and vacuum sputtering of semiconductors. We can provide customers with customized wafer carriers of silicon and silicon carbide materials to meet customers' different application needs.

Silicon Carbide SiC Cantilever Paddle

Silicon Carbide SiC Cantilever Paddle

Silicon Carbide SiC Cantilever Paddle used in Automatic loading and handling in diffusion furnace Silicon carbide cantilever Paddle is a key component of semiconductor wafer loading system. Silicon carbide cantilever paddle used in photovoltaic new energy industry, with main specifications of 2378 mm, 2550 mm, 2660 mm, etc Silicon carbide cantilever propeller is mainly used in the (diffusion) coating process of polycrystalline silicon wafer or monocrystalline silicon wafer in diffusion furnace, and plays a role in the bearing and transportation of silicon wafer in high temperature environment (1000-1300 ℃).

Machinable Glass Ceramic Macor Rod

Machinable Glass Ceramic Macor Rod

Machinable ceramic materials have excellent electrical insulation performance (electric breakdown reaches 40kv/a per millimeter), high mechanical strength, and resistance to quenching and heating (resistance to freezing and heating from minus 200 degrees to 800 degrees, and are widely used in welding fixtures, optical glass forming molds, etc.).

Aluminum Nitride Ceramic AIN Pin Rod

Aluminum Nitride Ceramic AIN Pin Rod

Aluminum nitride pin rod has excellent thermal conductivity (5-10 times that of alumina ceramics), low dielectric constant and dielectric loss, reliable insulation performance, excellent mechanical properties, non-toxic, high temperature resistance, chemical corrosion resistance, and is similar to the thermal expansion coefficient of silicon. It is widely used in communication devices, high brightness LEDs, power electronic devices and other industries.

Ceramic Piston with Metal Plunger

Ceramic Piston with Metal Plunger

This ceramic piston with metal plunger made of zirconia ceramic + SST316L . It  is used on laboratory equipment is  at room temperature. The range inside could be 15-50 °C. The pressure at normal usage is atmospheric pressure + 2 / - 0.7 bar but could be +10 bar for short time in failure.

Diameter 2mm 3mm  99 Alumina Ceramic Pin

Diameter 2mm 3mm 99 Alumina Ceramic Pin

The alumina ceramic pin diameter is 2.84mm , tolerance ±0.01mm,  Length 26 ±0.2 mm , one end chamfered . Surface is well polished to Ra 0.8 um .  Its forming way is isostatic pressing . It used in welding industry .

Zirconia Ceramic Wafer Clamp for Semiconductor Industry

Zirconia Ceramic Wafer Clamp for Semiconductor Industry

Zirconia ceramic wafer clamp is a kind of ceramic accessory commonly used in solar photovoltaic equipment, and it is also an important component applied in photovoltaic production equipment. The processing of ceramic top gear is very difficult, mainly because of material and structure.

RBSiC SiC Ceramic Ring Sleeve

RBSiC SiC Ceramic Ring Sleeve

RBSiC Silicon Carbide material has excellent properties such as good high-temperature thermal stability, high thermal conductivity, high acid and alkali corrosion resistance, low expansion coefficient, good thermal shock resistance, low density, low friction coefficient when paired with carbon graphite and its own, and extremely high hardness.

Zirconia Ceramic Tube Sleeve

Zirconia Ceramic Tube Sleeve

Zirconia Ceramic Tube Sleeve has large hardness, low wear rate and long service life, which can greatly reduce the pollution of grinding raw materials and ensure product quality. At the same time, zirconia material has high density and strong impact energy when used as grinding medium,

96% Alumina Ceramic Nozzle Blown Discharge

96% Alumina Ceramic Nozzle Blown Discharge

Advantages of alumina ceramic nozzle blown discharge : (1) High mechanical strength. The bending strength of alumina ceramic sintered products can reach 250Mpa, and that of hot pressed products can reach 500MPa. The strength can be maintained to 900 ℃ at high temperature (2) High resistivity, good electrical insulation performance, room temperature resistivity 1015 Ω· cm, insulation strength 15kv/mm (3) High hardness, Mohs hardness is 9

Ceramic Focus Ring for Plasma Etch Equipment

Ceramic Focus Ring for Plasma Etch Equipment

When aluminum alloy is selected as the chamber material of the etcher, it is easy to cause metal particle pollution. Instead, a dense anodic aluminum oxide layer is coated on the aluminum alloy to improve the corrosion resistance of the chamber material through anodic oxidation. It is found in practice that the anodic aluminum oxide layer is prone to spalling.

Electric Ceramic Insulator Bushing

Electric Ceramic Insulator Bushing

Electrical insulating ceramics have good thermal conductivity, low conductivity and constant dielectric small number, low dielectric loss, high mechanical strength, good chemical stability, etc, It is widely used in bath of molten metal, container of molten salt and packaging material integrated circuit substrate, electrolytic cell lining, metal matrix composite reinforcement body, active armor material, heat sink and heating element of high temperature furnace.

Online Inquiry