Machinable Glass Ceramic Rod
- Brand Name
- 3X Ceramic Parts
- Material Type
- machinable glass ceramic
- MOQ
- 5 pieces
- Specification
- custom make
- Density
- 2.48g/cm3
- Max working temperature
- 800℃
- Thermal Conductivity
- 1.71W/m.k
- Compressive Strength
- >508Mpa
- Flexural Strength
- >108Mpa
- Delivery Time
- 25 days around
- Shipping Way
- by express
- PACKAGE
- safety packing
Machinable Glass Ceramic Rod Properties :
Machinable Glass Ceramic rod with excellent compressive strength, high thermal insulating value, radiation immunity, and excellent dielectrical strength. Unlike plastics, whose temperature resistance and rigidity starts to fall off at as little at 150°C, Macor is non-ductile and is deformation resistant to 800°C (up to 1,000°C with no load or weight-bearing). Macor is so thermally stable that it is cut into small blocks against which are measured deformations in materials in high temperature, radioactive conditions.
- Very tight machining tolerances of up to 0.0005in (0.013mm).
- Can be machined with normal metalworking tools
- Macor can be thick or thin film metallized, brazed, epoxy and frit bonded
- Won’t outgas in vacuum environment
- Does not require firing after machining
- Strong and rigid; unlike high temperature plastics, Macor will not creep or deform
- Zero porosity
- Can be polished to a smoothness of 0.5µm
