Thin Thickness 0.3mm 0.5mm 1mm Zirconia Ceramic Sheet

Brand Name
3X Ceramic Parts
Material Type
zirconia ceramic
Forming Way
slip casting or isostatic pressing
10 pieces
custom make
custom make
Surface finish
polished or not
Main Property
high strength
Machining Way

Thin Thickness 0.3mm 0.5mm 1mm Zirconia Ceramic Sheet 

If the length and width of the zirconia sheet less than 250mm,  and thickness less than 1mm  we could use slip casting forming way for producing those ultra thin zirconia ceramic sheet .  But it also depends on the requirements of the customer on the tolerance , surface finish , strength .  We could also flap a thick zirconia ceramic sheet to the thiner idea thickness , while its cost is much higher than slip casting . The surface could be mirror  polished , roughness could reach as fine as 0.02mm .  

The tolerance of thickness , width and length we could also reach to 0.001mm by high precision machining , which could meet customer high tolerance requirements . The color we could custom make it to black , white generally .  

Material Datasheet of zirconia ceramic :   

Properties  Units   Zirconia                                               (Y-TZP)  Zirconia                                                       (Mg-PSZ) 
Mechanical   Density  gm/cc 6 5.5
Porosity  % 0 0
Flexural Strength      Mpa 1200 900
Compressive Strength  Mpa 2500 1700
Elastic Modulus  Gpa 200 200
Poisson's Ratio  / 0.23 0.23
 Hardness   kg/mm2 1300 1100
Fracture Toughness  KIC Mpa *m 1/2 13 11
Thermal            Heat Conductivity     W/ m*k  2 2
Coefficient of Thermal Expansion                            10-6/K 10.3 10.2
Specific Heat  j/kg*K 400 400
Thermal Shock Resistance   °C  350 350
Max UseTemperature                                            °C 1500 500
Electrical   Dielectric  Strength  ac-kv/mm 9 9.4
Dielectric Constant  / 29 28
Loss Tangent  / 0.001 0.001
Volume Resistivity ohm•cm  >1010 >1010

Online Inquiry